Description

Simpson Strong-Tie CNW1-1/4 – 1-1/4″ Coupler Nut w/ Witness Hole

Nuts and Couplers

Simpson Strong-Tie coupler nuts are a tested and load-rated method to join threaded rod and anchor bolts. The Witness Hole in each nut provides a means to verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod. The HSCNW exceeds the specified minimum tensile capacity of corresponding ASTM A449 bolts and threaded rod. for other coupler nut sizes.

Finish

• Zinc plated

Installation

• Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation.
• Standard CNW for use with non-hot-dip galvanized all-thread rod only.
• 5/8″- and 7/8″-diameter couplers available with oversized threads for installation to hot-dip galvanized bolts (order CNW5/8-5/8OST and CNW7/8-7/8OST).
• Some OST couplers are typically oversized on one end of the coupler nut only and will be marked with an “O” on oversized side. Couplers may be oversized on both ends.