Description

Simpson Strong-Tie SUL26SS – 2 X 6 Joist Hanger Skewed Left Ss

The SUR/L are 45-skewed hangers designed to support solid sawn and engineered wood products used in wood construction. These U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation. The SUR and SUL hangers are identical except that they are skewed 45 to the right (SUR) and the left (SUL), respectively.

Key Features

• Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
• These hangers cannot be modified but will accommodate a 40 to 50 skewed joist
• Features positive-angle nailing for engineered wood sizes to prevent wood splitting and to speed installation
• Available with the A2 (acute) flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)

Material

• 16 gauge

Finish

• Galvanized. Some products available in ZMAX coating or stainless steel; see Corrosion Information.

Installation

• Use all specified fasteners; see General Notes.
• The joist end may be square cut or bevel cut.
• Fill all round and obround nail holes with specified fasteners to achieve table loads. Where noted, triangle holes in the joist flange may be filled for additional uplift capacity.
• For I-joists with flanges less than 1 5/16″, web stiffeners are required for all double joist hangers when using hangers that are 14 gauge and lighter.