Description

Simpson Strong-Tie PAB5H-24-HDG – 5/8 X 24In Hs Pab Hot Dip Galv

The PAB anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer, at the embedded end, sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour.

Key Features

• Available in diameters from 1/2″ to 1 1/4″ and lengths from 12″ to 36″ (in 6″ increments)
• Available in standard and high-strength steel
• Head stamp contains the No Equal sign, diameter designation and an “H” on high-strength rods

Material

• Standard Steel ASTM F1554 Grade 36, A36 or A307; Fu = 58 ksi
• High-Strength Steel (up to 1″ dia.) ASTM A449; Fu = 120 ksi
• High-Strength Steel (1 1/8″ and 1 1/4″ dia.) ASTM A193 B7 or F1554 Grade 105; Fu = 125 ksi

Finish

• None or HDG

Installation

• On HDG PABs, chase the threads to use standard nuts or couplers or use overtapped products in accordance with ASTM A563; for example, Simpson Strong-Tie NUT5/8-OST, NUT7/8-OST, CNW5/8-OST, CNW7/8-OST. Couplers may be special ordered with both ends oversized. Couplers may be oversized on both ends. Contact Simpson Strong-Tie.

Ordering Information

• When calling out PAB anchor bolts, substitute the desired length for the “XX” in the Root Model Number
• For a 5/8″ x 18″ anchor bolt, the model number would be PAB5-18 (or PAB5H-18 for high strength)