Description

Simpson Strong-Tie HUC316 – Galvanized Face-Mount Concealed Joist Hanger for 3X16

The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45.

Features

• Extra optional triangle holes for additional load
• HUC-series hangers are tested, load rated and code compliant

Material

• 14 ga. (68 mil)

Finish

• Galvanized

Installation

• Use all specified fasteners; see General Notes.
• Can be installed filling round holes only, or filling round and triangle holes for maximum values.
• Joists sloped up to 1/4:12 achieve table loads.
• For installations to masonry or concrete, see HUC
• Can be welded to a steel member. Allowable loads are the lesser of the values in the hanger tables or the weld capacity refer to technical bulletinHU/HUC Welded onto Steel Members(T-C-HUHUC-W).
• When nailing into solid sawn carrying member’s end grain, the allowable load is adjusted by a factor of 0.67.